Instructions
First prepare the pieces – cut and finish the edges of all pockets (Bevel, crease, edges paint or burnish). Next, thin down the
marked areas, use a belt skiver or a skiving knife. At this stage, glue and install the pockets in place and finish up the whole
interior, including stitching the top and the middle bottom. For the coin pocket, you can use the interlining piece for a more
digitised look, use leather as recommended or other interlining material as you see fit. Now, assemble the belt – skive marked
area, glue the lining , finish the edges and stitch.
The next stage would be to prepare the shell – Glue the lining in 45 degrees and stitch the belt in place. After the shell is prepared,
glue the interior and stitch all around. To finish use a FN1.5 creaser and finish the edges with edges paint or plain burnishing
Vertical Bifold
9.00€
Leather : medium – hard tempered. Thickness 0.8-1.2mm
Stitching line : 3.85 with 3.0mm edge distance.
Tools : Edge beveler #0, edge creaser (FN1.5), Irons 3.85
Thread: 0.4 linen or polyester.